Elevation Rod and Fixings
Franklin elevation rods, consisting of 2 m elements, nest into each other, avoiding bolting and water infiltration that can cause premature corrosion. These heavy-duty rods require no guying. They are delivered with conductor connecting clamps (stainless steel).
“Standard” version: drawn seamless steel, galvanized.
“Corrosive atmosphere” version: stainless steel.
Guying kit: AFD1050KH
Support sockets for caulking or welding
These sockets are designed to accomodate lightning conductor staffs or elevation rods by simple fitting. Like the elevation rods, they feature a hammered out section adjusted to 25 cm. They can be used as sockets for caulking in concrete cubes or can be welded to the structural steelwork.
Fixing brackets presented below are designed for lightning conductors installation such as:
• 2 fixing brackets for lightning conductors installation only or quipped with an elevation rod,
• 3 fixing brackets for lightning conductors installation with 2 or 3 elevation rods
“OFFSET” FIXING BRACKETS
Fixing by stud gun, bolting, taping…LATERAL FIXING BRACKETS
For offset fixing of lightning conductor masts and elevation rod on towers, vertical pipes, metal frameworks.MULTI-PURPOSE FIXING BRACKETS
To be used when the wall does not allow deep caulking. Fixed by stud gun, pluf or taping.Used to fix 2F elevation rods. Locked in place by a clip.LATERAL SEALING BRACKETS
Refer to the PDF here under (Elevation rods and fixings 2 on 3)
Three-feet saddles are designed for fixing the lightning conductors and elevation rods in terrace or on the ground. Made of galvanized steel, it can be used for every lightning conductors and elevation rods with a diameter of Ø 50 cm.SADDLE
Fixing of Saint Elme® lightning conductors and 2.40 m Franklin rods only (Ref. 0001 SE and 1001 PF) to towers and metal frameworks.TAPING
Generally used to fix lightning conductors and their elevation rods to stacks, concrete masts, etc.
WATER DEFLECTING CONES
Water deflecting cones: water deflecting cones are mainly used for vertical fixings of lightning conductors and their support masts on roofs. Two rubber models are suitable for different passage diameters. Their reinforced aluminium alloy base, forming a plate, can be deformed to match different structural shapes while remaining water-proof. Possibility of fixing by sealed rivets.