IMT Solar Irradiance Sensor -

IMT Solar Irradiance Sensor

Irradiance Sensor (Si Series)
•Silicon irradiance sensors (Si sensor) show a cost-effective, but rugged
and reliable solution for the measurement of solar irradiance, especially
for the monitoring of Photovoltaic (PV) systems.
•Based on the construction of the sensor element corresponding to a PV module they are ideal as reference for the monitoring of PV systems.
•Especially the spectral response comparable to PV modules as well as the similar inclination error (incident angle modifier) allow an exact analysis of PV energy yields using Si sensor data.!

General Data
Solar cell	Monocrystalline silicon(50 mm x 33 mm)
Measurement	Possible up to 1500 W/m² (depending on sensor type)
Working temperature	–35°C to 80°C
Electrical connection	Via 3m cable, uv and weatherproof
Case, protection mode	Powder-coated aluminum, IP 65
Measurement uncertainty	±5 W/m2 ± 2.5 % of reading valid for temperature compensation, spectrum AM 1.5 and vertical light beam

Type	Signal Irradiance	Signal cell Temperature
Si-V-1.5TC-batt Si-V-1.5TC-batt	0 to 1.5 V for 0 to 1500 W/m²	./.
Si-V-1.5TC Si-V-1.5TC	0 to 1.5 V for 0 to 1500 W/m²	./.
Si-V-1.5TC-T Si-V-1.5TC-T	0 to 1.5 V for 0 to 1500 W/m²	0 to 2 V for -40 to +90°C
Si-mV-85 Si-mV-85	approx. 85 mV for 1,500 W/m2	./.
Si-mV-85-Pt100(-4L) Si-mV-85-Pt100(-4L)	approx. 85 mV for 1500 W/m²	Pt100
Si-mV-85-Pt1000(-4L) Si-mV-85-Pt1000(-4L)	ca. 60 mV for 1000 W/m²	Pt1000
Si-V-10TC Si-V-10TC	0 to 10 V for 0 to 1500 W/m²	./.
Si-V-10TC-T Si-V-10TC-T	0 to 10 V for 0 to 1500 W/m²	0 to 10 V for -40 to +90°C
Si-I-420TC Si-I-420TC	4 to 20 mA for 0 to 1500 W/m²	./.
Si-I-420TC-T Si-I-420TC-T	4 to 20 mA for 0 to 1500 W/m²	4 to 20 mA for -40 to +90°C
Si-RS485TC-T	M&T, MODBUS, 0 to 1,500 W/m2	-40 to +90°C
Si-RS485TC-2T	M&T, MODBUS, 0 to 1,500 W/m2	-40 to +90°C