Energie

Customised Heavy 2828

Customised Heavy 2828

Customised Heavy 2828

Cable Glands (Trinity Touch)
 
Cable Glands (Trinity Touch)
Type Left Right Top Bottom Total Quantity image box
PG 7 27 27 27 27 108
PG 9 21 21 21 21 84
PG 11 14 14 14 14 56
PG 13.5 12 12 12 12 48
PG 16 12 12 12 12 48
PG 21 9 9 9 9 36
PG 29 4 4 4 4 16
M12 16 16 16 16 64
M16 14 14 14 14 56
M20 12 12 12 12 48
M25 9 9 9 9 36
M32 4 4 4 4 16
M40 3 3 3 3 12
M50 3 3 3 3 12
M63 2 2 2 2 8
   
Terminal Block (Phoenix Contact)
 
Terminal Block (Phoenix Contact)
Type Number Wire Size mm Amp.Rating
UT/ST 2.5 40 0.2-2.5 24
UK 5N 33 0.2-4 41
UK6N 25 0.2-6 57
UK 10N 20 0.5-10 76
UK 16N 18 4-10 101
UIK 16N 18 4-16 101
   
DIN Mounting Rail (Trinity Touch)
 
DIN Mounting Rail (Trinity Touch)
Type Max. Length for enclosure Article No.
TDR2-35/7.5 Perforated 110 mm 011700271
TDR2-15/5.5 Perforated 110 mm 011700254
TDR3-35/7.5 Perforated 110 mm 011700283
TDR3-15/5.5 Perforated 110 mm 011700279
   
RAIL CURRENT CARRYING CAPACITY
 
Current Wire Size
Rail Material (A) AWG mm2
35/7.5 (Slotted) Steel 65 8 10
35/7.5 (Un Slotted) Steel 87 6 16
35/15 (Slotted) Steel 125 4 25
35/15 (Un Slotted) Steel 125 4 25
15/5.5 (Slotted) Steel 35 12 4
15/5.5 (Un Slotted) Steel 47 10 6
Difference between TDR2 and TDR3 series DIN Rails
S.No. Properties Unit TDR2 TDR3
1 Tensile Strength N/mm2 270 320 -410
2 Elongation N/mm2 28% 30 -36%
3 Hardness HRB 50
4 Elastic Limit N/mm2 ———– 230 -280
5 SST stability Red Rust (Minimum) Hours 240 350
   
About Mounting DIN Rails
 
•Most of the electrical accessories are designed to mount on rails that can be fixed easily on panel boards and equipments. • Mounting rails made of steel in accordance (DIN 60715) are available in Zinc plated and thick film trivalent chrome passivated. The base metal as steel used for DIN rails as per EN10130. Due to high mechanical strength & durability, high corrosion prohibitive plating and lead free (Confirms to RoHS compliance) provides the best solution for general applications. • These rails are often used as grounding bars. The current carrying capacity of these rails and the copper wire sizes required to carry that current are given above. • The 35/7.5 high rail is suitable for the majority of application and is the more cost effectiveness. • When heavy components like large PLC’s, Transformers, MPCB’S, heavy contactors and relays has to be mount than 35/15 rail is more suitable. • The 15/5.5 rail is more than half width of 35/7.5 is used for mounting of terminal blocks in confined spaces.
   
Socket/Plug
Type Number
16A- 5 PIN 4
16A- 3 PIN 4
32A- 5 PIN 4
32A- 3 PIN 4
63A – 5 PIN 2
125A – 5 PIN 2
Push Button
Type Number
22.5 mm 25 Nos
30 mm 25 Nos
MCB
Type Number
Single Pole 14
   
ACCESSORIES :
Size 280 X 280 X 130 (H X W X D mm) Ordering Data For Accessories
 
Mounting Plate Type Article No. Mounting Plate
Mounting Plate CRCA Sheet Heavy MP 2828 011700618
Thickness 1.5 mm
Zinc Plated
Mounting Clamp Type Article No. Mounting Clamp
Mounting Clamp CRCA Sheet Heavy MC 2828 011700619
Thickness 3 mm
Zinc Plated
Hinge Article No. Hinge
Hinge Material Plastic 011700625
Hinge Colour Grey
Cover Screw Article No. Cover Screw
Polyamide Grey Colour 011700912
Window Article No. Window
Window Material Plastic 011700909
Window Colour Transparent
   
Existing Customised Solutions :
Existing Customised Solutions of Terminal Block Enclosure
Description Article No. DIN Mounting Rail Terminal Block
Type Qty. Type Qty.
CS-ABS 2828 SU (6181120) 011700069 TDR2-35/7.5 250 mm UK 2.5B 42
UK 5N 10
 
Existing Customised Solutions of Surge Arrester Enclosure
Description Article No. DIN Mounting Rail Surge Arrester
Type Qty. Type Qty.
CS-ABS 2828 SAB 011700031 TDR2-35/7.5 250 mm FLT Plus CTRL 0.9 3
VAL-MS 320 ST 3
FLT 100 N/PE CTRL 1.5 1